Our Mission

We aim to add value by means of helping businesses to cut down plant downtime, streamline labour costs, increase plant efficiency and enhance productivity. Our VAS range shall cover inventory management, tool making, machining services, sourcing hard to find items & speedy parts delivery.

NZ’s Supplier of Bearings, Power Transmission and Engineering solutions.

Our Mission

We aim to add value by means of helping businesses to cut down plant downtime, streamline labour costs, increase plant efficiency and enhance productivity. Our VAS range shall cover inventory management, tool making, machining services, sourcing hard to find items & speedy parts delivery.

Quality – Solve – Serve – Supply

Categories

Bearings

The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

linear-motion bearing or linear slide is a bearing designed to provide free motion in one direction.

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

needle roller bearing is a bearing which uses small cylindrical rollers. The difference of a needle roller bearing and roller bearing is the ratio of diameter and length of their rollers, when the ratio of the diameter and the length of roller of a roller bearing is between the interval of 0.4 to 0.1, that roller bearing is called as needle roller bearing. They are used to reduce friction of a rotating surface.

spherical plain bearing is a bearing that permits angular rotation about a central point in two orthogonal directions (usually within a specified angular limit based on the bearing geometry). Typically these bearings support a rotating shaft in the [bore] of the inner ring that must move not only rotationally, but also at an angle.

Power Transmission

belt is a loop of flexible material used to mechanically link two or more rotating shafts, most often parallel. Belts may be used as a source of motion, to transmit power efficiently, or to track relative movement. Belts are looped over pulleys and may have a twist between the pulleys, and the shafts need not be parallel. In a two pulley system, the belt can either drive the pulleys normally in one direction (the same if on parallel shafts), or the belt may be crossed, so that the direction of the driven shaft is reversed (the opposite direction to the driver if on parallel shafts). As a source of motion, a conveyor belt is one application where the belt is adapted to continuously carry a load between two points.

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tubedrawing machines, printing pressescarsmotorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient means of power transmission.

coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation,

 A machine consists of a power source and a power transmission system, which provides controlled application of the power. transmission is an assembly of parts including the speed-changing gears and the propeller shaft by which the power is transmitted from an engine to a live axle. Often transmission refers simply to the gearbox that uses gears and gear trains to provide speed and torque conversions from a rotating power source to another device.

There are 2 types of motors that we supply:

A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.

An electric motor is an electric machine that converts electrical energy into mechanical energy.

pulley is a wheel on an axle that is designed to support movement and change of direction of a cable or belt along its circumference. Pulleys are used in a variety of ways to lift loads, apply forces, and to transmit power.

 mechanical seal is a device that helps join systems or mechanisms together by preventing leakage, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.

Sprockets are used in machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc. Perhaps the most common form of sprocket may be found in the bicycle, in which the pedal shaft carries a large sprocket-wheel, which drives a chain, which, in turn, drives a small sprocket on the axle of the rear wheel.

Engineering Supplies

Abrasives, Cutting Tools, Hand tool Suppliers

Hydraulics

Pneumatics

Workshop Services

Your Content Goes Here

Your Content Goes Here

Power Transmission components, engineering supplies, source hard to find engineering items, breakdown assistance, machine shop

One Stop Shop

A one-stop shop, one-stop store or one-stop source is a business or office where multiple services are offered; i.e., customers can get all they need in just “one stop”.

NZ’s Supplier of Bearings, Power Transmission and Engineering solutions.
Prism NZ is committed to providing customers with its quality products and services and prides itself on wide range and prompt delivery.
Prism NZ provides solutions through its total engineering capabilities and experience.

One Stop Shop

one-stop shopone-stop store or one-stop source is a business or office where multiple services are offered; i.e., customers can get all they need in just “one stop”.

NZ’s Supplier of Bearings, Power Transmission and Engineering solutions.
Prism NZ is committed to providing customers with its quality products and services and prides itself on wide range and prompt delivery.
Prism NZ provides solutions through its total engineering capabilities and experience.

Testimonials

I have found Pram and Raj from Prism to offer exemplary service with everything from fastenings to bearings to hand tools and everything else.
Very prompt service in a breakdown situation and after hours service when we have needed it.
I would not hesitate to recommend Prism to any company looking for an efficient knowledgeable  supplier who goes the extra mile for its customers! – Ian

I just wanted to commend Raj and team for such awesome services. The effort and information supplied in helping the plants efficiency, and cost saving through the years is outstanding. Thanks to Prism Solutions in coming through once again. Keep up the great customer service. Will surely recommend you to any organisation. – Collin

Tasked with both scheduled and running maintenance responsibilities, performing my duties in a timely manner is a major challenge.
I got acquainted with Pram of Prism Solutions four years ago who became more than just a supplier. We have almost completely consolidated on using Prism as our preferred supplier ..
Prism come as advertised:
* Bearings
* Drive Chains
* Drive Belts
* Sprockets
* Consumables
* Lubricants
* Value added Services like Machining
* Sourcing hard to find items
* PPE and safety related items
* Etc.

Prism Solutions saves us time and money – Hendrik

From day one I have met Raj from “Prism Solutions” as one of our key suppliers – sounds funny even saying my number 1 suppliers because over the course of only a short time Raj became “my friend”. “Prism Solutions” has been there – above and beyond – in every aspect of not only the showing and final sales. But every bump in the road – Raj was there to assist me. And I know some of the stuff he did was not part of his normal job description as my supplier. My South Africa mother would call him: a piece of cake, He is so good, I mean, the cherry on top as Raj always impressed me with his pricing and speediness of supplying on time every time. Raj always got back to me, answered every question. Even the stupid ones.  He is honest and he is good, and he has been there for me like a best friend. Raj stood by me to the finishing line. – Didi

I just want to say thanks for all your great service over the years. Pram and his company PRISM SOLUTIONS  have been working as a supplier of engineering items to my maintenance workshop since 2015.

He has supplied a wide variety of parts including:

         Bearings and Lubricants

       Chains and Sprockets

         Timing belts and Pulleys

         Tools and Machining parts

         Valves and cylinders

      All types of Fasteners

Prism specialize in hard to source products – of which Pram has been a great asset to us. He always goes the extra yards and his service has been excellent. I would recommend him as a supplier to any new clients. Cheers – Brian 

If you are looking for a real problem-solving solution, then Prism is the people to contact immediately! The service is second to none! Prompt service, customer satisfaction, problem solved within minutes! Whatever problems you have, Prism has the solutions! Contact Prism! They are always available to help and are experienced in all mechanical and technical solutions! Reliance on Prism has been my biggest drive for a long-lasting relationship. “Prism” yes, they have the solutions! – Joseph

Pram & Raj Thank you for your great effort made in getting CTL repaired so promptly – My machine operator said that the machining of the part was perfect – excellent and thanks. Very much appreciated guys – Rajkumar

Your Content Goes Here

Having Raj and Pram (Prism Solutions) on my team has been a real plus for my business. From finding the difficult of type item to the everyday any quantity parts, the service is top grade, friendly and on time. The advice, expertise and professionalism are all part of their business – Stephen

Your Content Goes Here

It is rare these days to find a company that prides itself on customer service in the way that Prism do. Raj and the team always go the extra mile to ensure you have everything your company needs from machine parts to safety equipment. We have been working with Prism for 3 years now and they have never let us down. Highly Recommended!

Steve P., Your Content Goes Here

We are a producer of timber pallets, bins, and crates in Auckland. With a large machine and equipment-based manufacturing operation and sawmill we have a high demand for engineering products and consumables. Our company has been using Prism Solutions for the past 3 plus years. Initially they supplied engineering products and consumables for all our workshop and factory requirements, but now they also provide a full range of H&S equipment, PPE, clothing, and tools at extremely competitive prices. Owners of the business Raj and Pram are both friendly, professional, dedicated operators who go the extra mile to accommodate all our requirements. They are extremely good at sourcing hard to find engineering products and have a wealth of industry knowledge and expertise. After 24 years in business, I have never been this impressed with a supplier. For all your engineering and H&S requirements I have no hesitation in recommending Prism Solutions. – Steve W

Your Content Goes Here

“Working with Raj @ Prism Solutions makes it hassle free. Raj is easy to deal with and keeps the process simple. I can place an order and not have to worry about it, I know it is going to turn up. I highly recommend Prism Solutions service and if Prism make a promise, they keep it.” – Warren

Your Content Goes Here

We have been sourcing parts from Prism Solutions for more than 3 years now. We find that you get looked after by Prism better than the big companies do. Raj always responds promptly and makes it his mission to get you the best pricing and fastest delivery, even if he must deliver it personally.  No order seems too big or too small. – Shane

Your Content Goes Here
Raj has supplied our engineering and safety equipment for the past three
years and in that time, he has always provided us with the best service
possible. With Raj the customer is always right and when we ask for urgency you
cannot beat this man no matter how small or inexpensive the part may be.
Always striving to please and just a good guy. So, from experience of 35 years in the industry i would recommend Prism
Solutions to anyone for service. - Signing out Richard Cousins maintenance fitter

Pram and his company PRISM SOLUTIONS have been working as a supplier of engineering items to my maintenance workshop since 2016. He has supplied a wide variety of parts including Bearings, Timing belts, Pulleys, Sprockets & Valves. Prism NZ specialize in hard to source products – of which Pram has been a great asset to us. He always goes the extra yards, and his service has been excellent. I would recommend him as a supplier to any new clients. – Brian

Your Content Goes Here

No problem is too hard and customer service is a priority for this company. Good old-fashioned service with a friendly smile and always available to pop in on request enabling me to talk through my requirements. Friendly and efficient and able to supply on demand – what more could I ask for. – Andrew

Your Content Goes Here

Prism Solutions has been one of our top suppliers over the last 3+ years. With the running of 3 separate departments, (Sawmill, Pre-Cut, and Assembly) and nearly 100 staff and 50+ Workstations/Machines we depend on solid suppliers that can supply a good service, and good quality parts. Prism has always been there when we need them and has always supplied us with a quick and efficient service. Over the last 18 months, Prism Safety has also been our supplier for PPE gear and Health & Safety, equipment, and signage etc. I am incredibly pleased with Prism Solutions, and we would recommend any company to use them and their services. – Dave

Your Content Goes Here

About Us

PRISM NZ is 100% NZ owned and operated. We offer a wide range of mechanical power transmission components and provide a smart Value Added Services (VAS) package to our customers. The business shall drive its mission statement to NZ market.

The team at PRISM NZ has a wealth of experience in managing operational and administrative challenges for small, medium and large businesses. PRISM NZ provides innovative solutions delivering real value to its customers.

Contact Us Now

About Us

PRISM NZ is 100% NZ owned and operated. We offer a wide range of mechanical power transmission components and provide a smart Value Added Services (VAS) package to our customers. The business shall drive its mission statement to NZ market.

The team at PRISM NZ has a wealth of experience in managing operational and administrative challenges for small, medium and large businesses. PRISM NZ provides innovative solutions delivering real value to its customers.

Contact Us Now

Contact us

Send us a message here and we will endeavour to get back to as soon as possible

Pram 021 644 444

Raj  021 067 1455

team@prismsolutions.co.nz

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

Contact us

Send us a message here and we will endeavour to get back to as soon as possible

Pram 021 644 444

Raj  021 067 1455

team@prismsolutions.co.nz

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.